You are here: Home » News » PET Washing Line News » PET Recycling Line Introduction And Advantages
PET Recycling Line Introduction And Advantages

Zhangjiagang Lianguan Recycling Science & Technology Co.,Ltd pet recycling line is through my company’s R & D department of repeated tests, developed a new generation of efficient, water-saving equipment, the pet recycling line features: beautiful appearance, low energy consumption, Practical and reliable. The new rinsing device can be washed with the wash, greatly improving the production efficiency, and clean the net clean, to a level of net requirements.
PET recycling line Basic description:
PET recycling line mainly deal with the daily life of the waste of the original water bottles, beverage bottles, Coke bottles and other plastic bottles of renewable recovery cleaning. The recovery and production line can be divided into simple production lines, cold water film cleaning production line, high temperature hot water production line, through this production line to do the equipment, according to the different treatment process can be made staple fiber, three-dimensional bottle material, filament material. Made out of the bottle can be used for downstream work, for drawing with.
PET recycling line product features:
The company produced by the production of PET bottle flake cleaning and recycling production line is through the superb and reasonable and effective design so that the production line in the green areas of popular users and attention. Production equipment is also one of the equipment that is actively recommended. It will give users in environmental protection and effective use of energy to bring greater economic benefits. Recycling of PET plastic bottles refers to the use of PET plastic bottles, after a good bottle of recycled production lines for processing, can be recycled to make products, especially as a larger amount of chemical fiber textile raw materials. PET bottles in the beverage, food and beverage is widely used, but because of health reasons only a lot of one-time use, so the recovery of PET bottles of equipment is very popular with people’s attention.

PET washing line

PET recycling line

PET bottle recycling equipment main process description:
This set of cleaning production line mainly through the off-cut – broken – cleaning – drying these four links to clean and get high quality bottles for later use.
The first step, off the standard link: the use of off the standard machine, the PVC bottle on the PVC label to remove clean (in the treatment of compressed bottles and external waste when you need to use the bottle washing machine to the standard);
The second step, crushing links: the use of grinder, will remove the label of the PET bottles into the crusher crushed into 12-16mm size (if you consider the loss, it is best to break into 22-35mm size, clean and dry after the completion of two Broken down.
The third step, cleaning links: the first use of sink sink, the broken PET PET bottle and PP caps are separated by the sedimentation method, and then the bottle into the high temperature cooker for high temperature cooking (high temperature pot can add caustic soda Or cleaning agent, you can better remove the oil on the bottle and other stains), and then use high-speed friction washing machine attached to the bottle attached to the impurities and sediment, and then rinse the rinse off the bottle of residual caustic soda and other impurities, You can get a very clean high-purity PET PET bottle.
The fourth step, dry links, the first use of dehydration machine, the clean bottle will be dry 97% of the water. (If there is a higher demand, re-use the dryer, the dehydrated PET PET bottles through the hot air dryer to dry more than 99%, and then through the air dryer to remove a small amount of residual label paper). This time the bottle is already high-quality, low-quality high-quality PET bottle.
Pet bottle pieces broken cleaning recovery production line, bottle cleaning recovery production line:
First, the product description:
PET bottle flake cleaning and recycling production lines, automatic production lines, is dedicated to crushing, cleaning waste bottles, Coke bottles and other PET plastic sheet of equipment, the machine is through the scientific research department of repeated tests, developed a new generation of efficient, Water equipment, the machine features: beautiful appearance, low energy consumption, high yield, practical and reliable. The new rinsing device can be washed with the wash, greatly improving the production efficiency, and clean the material.
Features Of PET Recycling Line:
1. High level of automation, can effectively reduce labor costs, and to ensure high output capacity;
2. Humanized control system, control interface clear, easy to operate, easy to detect, you can emergency stop, easy to deal with emergencies;
3. All contact with plastic and water are made of high quality stainless steel to ensure that there will be no contamination of the bottle, crusher blade with special alloy forging, durable.
Third, the working principle and characteristics:
This set of cleaning production line mainly through the off-cut – broken – cleaning – drying these four links to clean and get high quality bottles for later use.
The first step, off the standard link: the use of off the standard machine, the PET bottle on the PVC label to remove clean (in the treatment of compressed bottles and external waste when you need to use the bottle washing machine to standard);
The second step, crushing: the use of crusher, remove the label PET PET bottles into the crusher into 12-16mm size (if you consider the loss, it is best to break into 22-35mm size, cleaning and drying is completed For the second break.);
The third step, cleaning links: the first use of sink sink, the broken PET PET bottle and PP caps are separated by the sedimentation method, and then the bottle into the high temperature cooker for high temperature cooking (high temperature pot can add caustic soda Or cleaning agent, you can better remove the oil on the bottle and other stains), and then use high-speed friction washing machine attached to the bottle attached to the impurities and sediment, and then rinse the rinse off the bottle of residual caustic soda and other impurities, You can get very clean high-purity PET bottles;
The fourth step, dry links, the first use of dehydration machine, the clean bottle will be dried 95% of the water. This time the bottle is already high-quality, low-quality high-quality PET bottle.

Category: PET Washing Line News

Leave a Reply

Your email address will not be published. Required fields are marked *